Torsion Testing Machine for Fasteners
EN 14399-2, ISO 16047
TTTFEN and TTTFISO Series for Torsion Testing of Fasteners - This test, which determines the functional characteristics identified in the relevant product standards,
has been developed to confirm the suitability of a high strength bolt/nut/washer assembly for preloaded bolted connections in civil engineering structures. It is applicable, basically, to bolts, screws, studs and nuts made of carbon steel and alloy steel, for carrying out torque/clamp force tests on threaded fasteners and related parts Torontech's TTTF Series of Torsion Testing Machine is designed to verify the suitability of high strength bolt/nut/washer assemblies for pre-loaded bolted connection in metallic structures.
The purpose of this test is to check the behavior of the fastener assembly so as to ensure that the required pre-load can be reliably obtained by the tightening methods specified in ENV 1090 with sufficient margins against over tightening and against failure.
The torque is generated by servo motor and gear box, the torsional angle is directly measured from servo motor, the bolt force and torque are also directly from load cells.
How Can We Help You?
Contact our sales team for a quotation.
|
Model |
TTTFEN and TTTFISO Series
|
|
Maximum Torque
|
500 N.m to 10,000 N.m (upon request)
|
|
Torque Measuring Accuracy
|
1% |
|
Maximum Bolt Force
|
200kN to 1,000kN (upon request)
|
|
Bolt Force Accuracy
|
± 1%
|
|
Rotation Angle Accuracy
|
0.01o
|
|
Rotation Method
|
Tight nut/ Tight bolt
|
|
Rotation Direction
|
Bi-Direction
|
|
Nominal Length (l) limit of bolt (figure 1)
|
Consult Torontech
|
|
Humidity Range
|
10% to 90% non-condensing
|
|
Storage Temperature
|
-40 to +66oC (-40 to +150oF)
|
|
Standard Configuration Includes:
|
Control Unit (Qty: 1)
Servo System (Qty: 1)
Gear Box (Qty: 1)
Load Cell for bolt force (Qty: 1)
Torque Sensor (Qty: 1)
Software (Qty: 1) |
