Engine Coolant Testing Equipment - Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics
Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics
Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics TT-2809
Apparatus for Cavitation Corrosion and Erosion-Corrosion Characteristics TT-2809 complies with ASTM D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants.
This test method distinguishes between coolants that cause cavitation corrosion and erosion-corrosion in aluminum automotive water pumps and those that do not. While the ratings from this test do not directly correlate to a specific number of miles in vehicle tests, some correlation has been observed with single-phase coolants in limited studies. Field tests under severe conditions are recommended for a comprehensive evaluation of a coolant's impact on cavitation corrosion and erosion-corrosion. With proper control of test variables, this method can also assess the effects of pump design, construction materials, and operating conditions on cavitation corrosion and erosion-corrosion damage.
1. Motor: Drives the cooling liquid circulation and is connected to the water pump.
2. Water Pump: Imported brand that meets ASTM D2809 requirements.
3. Vacuum Pressure Gauge: Digital display showing the real-time vacuum level at the pump inlet.
4. Throttling Valve: Adjusts the water pump flow rate.
5. Heater: Heats the cooling liquid to the test temperature.
6. Liquid Storage Tank: Stores the cooling liquid for the pipeline system.
7. Heat Exchanger: Supplies the test temperature of 35-38°C by exchanging heat with the cooling water.
8. Regulating Valve: Includes three valves to adjust the vacuum level and test pressure.
9. Pressure Gauge: Displays the real-time pressure value.
10. Expansion Chamber: Steam expansion device.
1. Applicable Standard: ASTM D2809
2. Ambient Requirements: Temperature 20-25°C, Relative Humidity < 60%
3. Pump Body Rotation Speed: 0-4600 ± 100 r/min
4. Fuse: 20A
5. Temperature Control Range: < 650°C
6. Temperature Accuracy: ±0.1°C
7. Flow Rate Range: 0-20 ml/min
8. Flow Rate Control Accuracy: ±5%
9. Rated Voltage: AC 220V, 50Hz (110V also available)
10. Total Power: 6.5KW
How Can We Help You?
Contact our sales team for a quotation.
